Wireless safety system

The wireless safety system from Carlo Gavazzi eliminates the spiral cables between doors and door controllers.

02/10/2012


Wireless safety system for industrial automatic doors from Carlo Gavazzi.Carlo Gavazzi has launched a new wireless safety system (WSS/WSM) for industrial automatic doors, which eliminates the spiral cables between door and door controller.

The WSS/WSM consists of a main controller (WSM), a subcontroller (WSS), and photoelectric safety edge sensors (PB11), and is also compatible with many other safety edge products already on the market. An operating range of 33 ft between the main controller and subcontroller allows use on large doors.

Each main controller can control up to four subcontrollers. Each subcontroller in turn can monitor two safety edges, or one safety edge and one door-in-door sensor. Thus a total of up to eight doors can be monitored by a single main controller. They are ideally suited for large multi-door warehouses and distribution centers. The main controller is connected to the safety input of the main door or gate control panel which operates the doors. The wireless subcontroller is powered by one to four batteries (user can determine how many batteries they wish to use), for extended operation time of over one year.

The controllers and subcontrollers are fully synchronized and multiplexed, operating on 16 channels, so no crosstalk interference occurs amongst individual sensors. The system meets all relevant global standards, and complies with all FCC and Canada IC regulations. With cUL and CE approvals for assurance of high quality and safety.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me