U.S. Department of Energy deploys virtual reality training solution

SimSci-Esscor platform from Invensys Operations Management helps train clean-coal power plant operators.

10/24/2012


SimSci-Esscor platform from Invensys Operations Management helps train clean-coal power plant operators.Invensys Operations Management, a global provider of manufacturing technology systems, software solutions, and consulting services announced that it has implemented a unique operator training simulator for the U.S. Department of Energy (DOE) using Invensys Operations Management’s SimSci-Esscor EYESIM virtual reality training solution.

Designed for use within integrated gasification combined cycle (IGCC) power plants with carbon capture, and implemented at the National Energy Technology Laboratory’s (NETL) Advanced Virtual Energy Simulation Training and Research (AVESTAR) Center in Morgantown, W.Va., the EYESIM solution uses 3-D virtual reality simulation to help train power plant control room and field operators. The company says that IGCC field operators wear a stereoscopic headset which immerses them in a virtual environment with the ability to move throughout the plant, coordinating their activities with control room operators, and interacting as if they were in the actual facility.

The EYESIM solution is also fully integrated with plant operating models, built on Invensys Operations Management’s SimSci-Esscor DYNSIM dynamic simulation software, so actions taken by a field operator affect the plant’s process, and actions performed in the control room change the information visible to the field operator. Fully interactive animations respond and react to the actions of plant personnel, illustrating how various pieces of equipment will operate under almost any scenario and condition. As a result, field and control room operators learn to collaborate and perform as a team.

“Training IGCC operators require us to simulate the chemical process of coal-gasification with CO2 capture together with combined-cycle power generation,” said Stephen E. Zitney, PhD, director of NETL's AVESTAR Center. “No one has ever done that before, but now with help from Invensys, we can simulate almost any operating scenario, including disturbances, malfunctions, and emergency shutdowns. We can even train operators on different coal and biomass feed stocks. The developments we’ve accomplished and the technology we’ve installed at the AVESTAR Center show the growing viability of IGCC power plants and indicate the growing demand for a well-trained work force. We look forward to working with Invensys as we train and enable the clean-coal operators of the future.”

The U.S. Energy Information Administration estimates that the U.S. has enough coal to last more than 200 years, but plants that continue to use conventional fossil fuel technologies will emit unacceptable levels of CO2 and other pollutants. IGCC with carbon capture offers an environmentally friendly alternative by capturing 90% of the CO2 produced by traditional fossil-fuel burning processes while at the same time reducing sulfur, mercury, and other NOx emissions. The IGCC process is more environmentally friendly than other coal-burning processes, but it is also extremely complex and requires skillfully trained personnel to operate what is effectively both a chemical processing plant and a power plant.

“Our EYESIM immersive training system makes the theoretical and conceptual side of training more realistic and tangible by allowing operators and trainees to become familiar with the layout of the physical plant and how it will operate under almost any condition,” said Tobias Scheele, PhD, vice president, advanced applications, Invensys Operations Management. “The solution combines stereoscopic 360-degree views with collision effects, sounds, lighting, and weather conditions to give the plant operator a realistic walkthrough environment and simulated hands-on experience with the plant’s physical operation, helping plant personnel improve operations excellence.”

A separate EYESIM virtual reality training system will be installed and commissioned at West Virginia University in Morgantown for student education and simulator training as part of assigned course work. In addition to training and plant design functions, the NETL and its research and development partners, including Invensys, will use the simulator to showcase the feasibility of clean-coal technology as a means to support future electrical generation demand without emitting environmental pollutants or greenhouse gases. The formal site acceptance test was completed on July 16, 2012, after a complete plant start-up.

www.netl.doe.gov/avestar

http://iom.invensys.com

http://iom.invensys.com/EN/Pages/SimSci-Esscor.aspx

Edited by Peter Welander, pwelander@cfemedia.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.