The future is looking bright for residential lighting control

Several lighting manufactures have demonstrated or released products that offer full lighting control for the residential space.

07/09/2012


In the past, having remote-controllable lighting in the home was something seen mainly in movies, and owned by only the few who could afford such a system. However, this is all about to change. Several lighting manufactures have demonstrated or released products that offer full lighting control for the residential space, at the right price point for consumers to take advantage of.  

Insteon has announced the release of an 8-W networked LED light bulb which features dual-band technology, meaning it can transmit over a building’s existing wires (powerline) or via wireless communication. These LED light bulbs can fit into traditional light fixtures, are fully dimmable and can be controlled by a remote control that is included in the package. Alternatively, with the use of an Insteon gateway, the system can be controlled by other devices such as smart phones or tablets. These light bulbs cost as low as $29, which puts them below the price of some standard LEDs.

I first saw light bulbs with integrated connectivity technology at Smart Lighting 2012 when I saw a demonstration of Greenwave Reality’s RF-enabled CFL and LED light bulbs. These light bulbs use NXP’s JenNet-IP wireless technology to connect the bulb to a dedicated remote, or again to a third-party device such as smart phone, when utilizing a gateway.

The great benefit of these systems is that they can be fitted into traditional lighting fixtures and only require the shipped remote for advanced control. This minimizes the cost implications that most consumers would have to endure when fitting systems that require new fixtures. With full lighting control at an appropriate price point, and in the form of a traditional light bulb with installation requiring no other skills than screwing it in to the fixture, advanced lighting controls will available to even the least ‘tech savvy’ people.

With solutions such as these, you will never find yourself dwelling on the question “did I remember to turn off the lights?” as the answer will only be a few clicks on your smart phone away.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me