Surface flush mount added to emergency stop buttons

The Surface Flush Mount E-Stop emergency stop buttons by Banner Engineering feature EZ-Light Logic and multiple E-stops can be connected via for system-wide control and safety.

01/08/2013


The Surface Flush Mount E-Stop emergency stop buttons by Banner Engineering feature EZ-Light Logic and multiple E-stops can be connected via for system-wide control and safety. Courtesy: Banner EngineeringBanner Engineering has added the Surface Flush Mount E-Stop to their emergency stop buttons. The 40-mm emergency stop buttons are designed to mount to a wall or other flat surface without disassembling or individual wiring.

To meet diverse application requirements, the illuminated-base Surface Flush Mount E-Stops feature Banner’s EZ-LIGHT logic and are available with two colors (yellow or green and red lighting) or one color (red lighting). Depending on the model, the LED illuminated-base changes from yellow to flashing red when actuated, immediately alerting operators to an emergency stop condition.

The lockable style actuator can provide supervisory or personal control. It is intended to prevent unauthorized or accidental resetting by accommodating a padlock to secure the actuated button in place.

To enhance safety across the factory floor, multiple E-stops can be connected via the CSS Series Hookup cordsets for system-wide control. By applying an external signal via the M12 QD connector, the illuminated-base models can change from a steady yellow light to a steady red indicator light when a stop condition exists. Models that interface with Safety BUS nodes/gateways are also available. 

Banner Engineering

www.bannerengineering.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me