Security systems integrators unsure of IT distributors

A new report from IMS Research has found that almost 40% of North American security systems integrators would prefer to deal with IT distributors when purchasing their IP-based video surveillance products.

05/17/2012


A new report from IMS Research, recently acquired by IHS Inc., has found that almost 40% of North American security systems integrators would prefer to deal with IT distributors when purchasing their IP-based video surveillance products. In Europe this figure surpasses 50% of systems integrators and installers.

Paul Bremner, market analyst at IMS Research comments, “While almost 40% of systems integrators would like to use IT distributors, there remains a large percentage that do not. The main concerns are that IT distributors have the knowledge about the networking part of the installation, but many still lack the knowledge of what lenses, housings or physical mounts to use. The other factor holding back many traditional systems integrators are the legacy security distributors where strong relationships exist and continue to persist.”

Another key finding from the research was that almost 80% of North American systems installers said they required better training from their suppliers of IP-based video surveillance products. Also topping the list of additional support required was telephone/web support, demo systems/materials and better software/SDKs(software development kits).

Bremner continues, “Systems installers have stated their requirements for better training, support, and demo systems. Many of these installers will only have taken a general training course for an overview of what the technology offers, while many still have had no formal training what so ever. This knowledge needs to be provided to installers, so that the installers feel more comfortable with IP systems.”



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me