Rugged cellular modems resist power surges

The M100CDMA cellular modem by Richardson RFPD is designed with a high voltage range and is resistant to power surges, making it suitable for demanding industrial applications.

03/19/2012


The M100CDMA cellular modem by Richardson RFPD is designed with a high voltage range and is resistant to power surges, making it suitable for demanding industrial applications. Courtesy: Richardson RFPDRichardson RFPD Inc.'s rugged cellular CDMA 1xRTT modems for M2M applications from Maestro Wireless Solutions are now available with full design support capabilities. The M100CDMA has been certified by regulatory bodies as well as Tier 1 network operators, including Verizon and Sprint. Compact, with a high voltage range and resistant to power surges, the device can easily be integrated into demanding industrial applications from electricity meters to intrusion alarms or vending machines. Additional suitable applications include OEM integration and SCADA/Telemetry. The device is also equipped with a GPS chip on-board to support location and tracking applications.

Key features of the M100CDMA include:

  • Sierra Wireless Q26 Elite Dual Band IS-2000 (800/1900 MHz), 1xRTT CDMA module
  • Rugged metal industrial case
  • 800/1900 MHz
  • Full TCP/IP stack, SMS
  • RS232 interface
  • Fully certified on Verizon, Sprint, and Aeris networks
  • Embedded gpsOne
  • 30 to +75 C operating temperature
  • High voltage range: 9-60 V dc

Richardson RFPD, Inc.

www.richardsonrfpd.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

More industrial network information is available at controleng.com/networks



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me