Rotary disconnect switches

Fused and non-fused rotary disconnect switches are available up to 1200A and include open and enclosed options for increased flexibility

04/08/2013


Fused and non-fused rotary disconnect switches are available up to 1200A and include open and enclosed options for increased flexibility. Courtesy: Cooper BussmannA new line of fused and non-fused rotary disconnect switches are available from 16A to 1200A also include open and enclosed options to meet UL508 and UL98 requirements. This complete line of load break disconnect switches is built to serve as a main disconnect, provide branch circuit protection or handle the equipment and motor loads often found in industrial or manufacturing applications. Open fused and non-fused disconnect switch models provide the flexibility of point-of-use configuration when designing and assembling custom panels. A complete offering of accessories, from handles and shafts to door mounting kits, allows users to custom build the exact configuration needed. 

Cooper Bussmann 

www.cooperbussmann.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me