Network interface for device level ring networks

The RapID Platform Interface by Innovasic supports device level ring (DLR) networks incorporates PriorityChannel technology to eliminate network traffic loading and ensure real-time EtherNet/IP messages are delivered.

12/14/2012


The RapID Platform Interface by Innovasic supports device level ring (DLR) networks incorporates PriorityChannel technology to eliminate network traffic loading and ensure real-time Ethernet/IP messages are delivered. Courtesy: InnovasicInnovasic's RapID Platform Network Interface for Industrial Ethernet connectivity supports high performance Device Level Ring (DLR) networks. DLR is the fault recovery protocol endorsed by ODVA for network ring topologies. The RapID Platform EtherNet/IP Network Interface with DLR supports beacon rates down to 100 µs enabling fault recovery and ring restore times of less than 10 ms. Participation in the DLR ring is transparent to any host processor or host application connected to the RapID Platform.

As with all protocol versions of the Network Interface, the EtherNet/IP version with DLR incorporates PriorityChannel technology. PriorityChannel eliminates the effects of network traffic loading and ensures real-time EtherNet/IP messages are always processed on-time. A field device incorporating Innovasic’s Network Interface solution is protected from unpredictable packet delays, excessive latency, and connection failure without worrying about network segmentation or switch configuration.

Innovasic

www.innovasic.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Boiler basics; 2017 Product of the Year winners; Manufacturing facilities Q&A; Building integration; Piping and pumping systems
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me