Multivariable vortex flowmeter works with liquids and gasses

Optiswirl 4070 from Krohne provides multivariable measurements in a two-wire configuration.

10/20/2010


Krohne Optiswirl 4070C FlowmeterKrohne now offers its new Optiswirl 4070 C flowmeter, a multivariable instrument that combines a vortex flow sensor with built-in temperature compensation and optionally available integrated pressure in a two-wire configuration. The company says this new device is an all-in-one product that delivers accurate measurement of standard volumetric and mass flow of conductive and non-conductive liquids, gases and vapors, even in applications that are prone to pressure and temperature fluctuations.

The 4070 C features a non-wearing, fully welded stainless steel structure that is highly resistant to corrosion, as well as high pressures and temperatures. It is designed for optimum reliability, featuring an intelligent signal processing system (ISP) that allows for stable flow readings while eliminating noise and spurious frequencies in the process.

In addition to its sturdy and dependable vortex sensor structure, the Optiswirl 4070 C includes a built-in temperature transducer and an optional pressure sensor with available isolation valve within its plug-and-play design, Pactware diagnostics and configuration software with DTM included at no extra cost.

This product is suited for a variety of process applications, including oil, gas, and chemical industries. It can handle many uses within such plants, including vapor and saturated steam measurement, steam boiler monitoring, compressor control, or compressed air systems monitoring. The meter can also be used for measurement of industrial gases, burner consumption measurement, and SIP or CIP processes in the food, beverage, and pharmaceutical industries.

www.krohne.com/northamerica

Edited by Peter Welander, pwelander@cfemedia.com

Also read Advances in Flowmeter Technology.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me