Molex co-sponsored third-place car at Indy 500

Molex Inc. co-sponsored Indy racing car of Tony Kanaan, finished third at the Indianapolis 500.

06/07/2012


Molex Inc. co-sponsored Indy racing car of Tony Kanaan, finished third at the Indianapolis 500, run over the Memorial Day weekend (May 26-27, 2012) at the famed race in Indiana.

Kanaan, driving the No. 11 Mouser Electronics/Geico/KV Racing Technology Chevrolet/Firestone IndyCar, wound up third behind champion Dario Franchitti and Scott Dixon.

Mouser Electronics distributes Molex product lines globally.

“Molex enthusiastically supported Tony Kanaan in his phenomenal achievement at this year’s Indy 500.  Like our strategic partner Mouser, we share Tony’s commitment to speed and high-performance,” states Fred Bell, vice president of global distribution, Molex.  “IndyCar is a great way to put the trusted Molex brand out to race fans, which includes many engineers.  We appreciate the marketing opportunity to be involved in such a dynamic, high technology sport.”

 “Molex has been a great supporter of our IndyCar racing program and we are very pleased to have them on board, especially with the spectacular outcome of Sunday’s race,” says Krystal Jackson, vice president of interconnects, Mouser Electronics.  “We appreciate the collaboration with Molex and look forward to the next racing event. They are a valued supplier partner on many levels.”



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me