SEARCH Archives
Loading
Sponsored by:

LED revenue will peak this decade

The 2012 market size is projected to be about $10.9 billion, with $2.9 billion in lighting and $8.0 billion in all other applications.

Source: IMS Research (acquired by IHS)

01/03/2013


IMS Research (acquired by IHS)IMS Research (acquired by IHS Inc.) is forecasting world packaged LED revenue to decline in the second half of the decade according to the latest Packaged LED – World – 2012 Report. With many LED end markets already saturated, the lighting sector is the main driver of growth this decade. The 2012 market size is projected to be about $10.9 billion, with $2.9 billion in lighting and $8.0 billion in all other applications. By 2015 the market is forecast to reach $13.5 billion in 2015, with $5.8 billion in lighting (doubling in three years) and $7.7 billion in other areas (almost unchanged, and actually slightly less).

But there has been a much more important development within the lighting market itself, in that IMS Research expects shipments of LED lamps to remain relatively flat from 2015 onwards. IMS Research Analyst Stewart Shinkwin explained, “This is mainly due to fewer replacements being required each year due to the longer-lifetime of CFL and LED lamps reducing the overall market.” With price erosion set to remain in double digit figures, the LED lighting sector, as component packaged LED revenue, is forecast to contract towards the end of the decade. With no other markets expected to grow significantly, IMS Research expects the total packaged LED market to fall towards the end of the decade (as revenue) once the general lighting market has peaked.

There are, however, a number of factors that could change the outlook, notably if adoption is slower than predicted over the next three or four years. In this alternative scenario, growth would be slower initially but could be maintained for a longer period throughout the decade. Other important issues IMS Research considered in the long-term forecast are how low can the price of an LED really fall, and exactly how much the rate of lumens/watt improvements will slow in the second half of the decade as fundamental limits are reached.

The TV sector is the second largest market for packaged LEDs. This market is forecast to grow slightly from 2012 ($2.0 billion) to 2016 ($2.4 billion), as LED adoption rates increase throughout the time period just enough to overcome price erosion and the reduction of LEDs required for a given area. LCD panel shipments are also forecast to increase slightly, while there is also the trend towards larger screens, one which has been ongoing for a number of years. However the number of LEDs required for a given sized screen has also been decreasing faster than had been previously expected; for example in the first quarter of 2012 the low cost TVs which were introduced used half the number of LEDs for a given area, and although overall LED TV penetration increased as a result, average LEDs per LCD TV actually fell from 175 in the fourth quarter of 2011 to 137 in the first quarter of 2012.  This trend cannot continue at the same rate forever and innovations may cause more LEDs to be used in some cases. However the overall trend is for a slow decline.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 under 40
Integrating lighting, HVAC systems; Use building energy modeling software to balance lighting and HVAC systems
Engineering hospital electrical systems, Boilers and boiler systems, Building envelope best practices
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Estimating data center PUE, Design tips for cost savings, Networked controls, NFPA 70E
Preventing arc flash, Backup power fuel choices, power for high-tech facilities
Using BIM in electrical power design; Closed-transition transfer; Medium-voltage distribution; Diesel emission regulations; Increasing emergency power capacity

Poll of the Week

When engineering systems in military buildings, what’s the most difficult issue you face?
Automation and controls
Codes and standards
Electrical and power
Energy efficiency, sustainability
Fire and life safety
HVAC


Click Here for Poll Archives
Sponsored by:

About Us | Contact Us | Advertise | Subscribe to Magazine | Site Map | Privacy Policy
Home | Channels | New Products | Media Library | Connect | Industry News | Events and Awards | Newsletters | Blogs | Magazine
Control Engineering | Plant Engineering | Consulting-Specifying Engineer
All content copyright © 2010-2013 CFE Media. All rights reserved.