IO processors for legacy systems

The IO processors by Opto 22 bring Ethernet networking and PAC-based control to legacy mistic and Pamux G4 digital I/O systems.

09/21/2012


The IO processors by Opto 22 bring Ethernet networking and PAC-based control to legacy mistic and Pamux G4 digital I/O systems. Courtesy: Opto 22Opto 22 has released the G4D32EB2-UPG and G4EB2, two I/O processors which allow automation professionals to upgrade a legacy mistic or Pamux G4 digital I/O system on a serial network to operate as part of a modern, Ethernet/TCP-based control system without needing to replace or modify existing I/O or field wiring.

The G4D32EB2-UPG and G4EB2 I/O processors are upgrades for legacy G4D32RS and B4 digital I/O processors, or "brains," used in legacy mistic and Pamux digital I/O systems, respectively. When upgraded with a new I/O processor, digital I/O points on the mistic or Pamux I/O system can be accessed over a standard, non-proprietary Ethernet network, and can be included as part of a control program running on an Opto 22 programmable automation controller (PAC) or as part of a custom software application running on a PC. The G4D32EB2-UPG and G4EB2 support multiple Ethernet protocols including OptoMMP, Modbus/TCP, and EtherNet/IP, and a standard TCP/IP interface is used with Opto 22 software development kits and developer toolkits.

Opto 22

www.opto22.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me