Integrated DC-DC converters

Enpirion's EN2300 family of 12 Volt DC-DC converters use PowerSoC technology for better system integration.

05/24/2012


Enpirion's EN2300 family of 12 Volt DC-DC converters use PowerSoC technology for better system integration. Courtesy: EnpirionEnpirion announced the availability of the EN2300 family of fully integrated 12 Volt DC-DC converters, which are implemented with MOSFET technology to double the power density. The addition of the EN2340QI 4 Amp, EN2360QI 6 Amp, EN2390QI 9 Amp, and EN23F0QI 15 Amp devices capitalize on Enpirion’s field  PowerSoC (power-system-on-chip) technology, which integrates the controller, power MOSFETs, high frequency input capacitors, compensation network and inductor.

Enpirion’s proprietary high-speed transistor structure implemented in 0.18u LDMOS process achieves a strong Figure of Merit (FOM = Gate Charge x On-state Resistance in units of milli-ohm nano-coulombs) to operate at high frequency while reducing switching losses. 

The EN2300 devices offer compact solution footprints from 4 Amp at 190mm2 to 15 Amp at 308mm2 which represents up to a sixty percent area reduction versus competing alternatives at comparable performance. The devices support an input voltage range of 4.5 to 14V and an output voltage range of 0.6 to 5V.

Enpirion

www.enpirion.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me