Insertion flowmeter offers more power for users

ABB AquaProbe insertion flowmeter is available with mains, battery, and renewable power sources.

05/06/2012


ABB’s Measurement Products’ business announces enhancements to its AquaProbe insertion electromagnetic flowmeter range with additional power source and transmitter options. The enhancements make it ideal for clean water applications whether they be existing permanent or temporary installations. Designed to work with both WaterMaster and AquaMaster 3 transmitters, the enhanced AquaProbe offers a wide choice of power solutions including main-and battery-power options, plus an all-new renewable power version which can draw power from either solar or wind-power.


AquaProbe flowmeter, Courtesy: ABBThe manufacturers, ABB Measurement Products, see this new extension to the AquaProbe range as representing a major step forward for insertion flowmeter capability. The key lies in the incorporation of the high-specification transmitter from ABB's WaterMaster range. The AquaProbe with WaterMaster transmitter is available with 4-20 mA with HART protocol or Profibus DP. In the field, WaterMaster transmitters incorporate many operator focused features. The backlit, graphical display can easily be rotated without the need for any tools, allowing field teams to customize the display that best fits their needs. "Through the glass" control allows local operator interface to input short, quick data for all user specific parameters.

Installing the AquaProbe is made simple by its use of ABB's "fit and flow" intelligent installation technology. With this technology AquaProbe eliminates the need to match flow sensor and transmitter in the field. On initial installation, the self-configuration sequence automatically replicates into the transmitter all calibration factors, meter size and serial numbers as well as site-specific settings, eliminating the opportunity for error.

AquaProbe is fully submersible with IP68/NEMA 6P protection rating and the absence of any moving parts results in increased reliability and reduced maintenance with no impact on performance. AquaProbe can be used on pipe sizes from 200 to 8000 mm (8 to 315 in.), the transmitter being mounted either locally or up to 200 m (650 ft) remote from the probe to facilitate ease of reading.

With the flexibility of the AquaProbe sensor, AquaProbe with AquaMaster 3 (FEA200) can be permanently installed as a monitoring device for economic management of the water supply, or used as a portable site survey tool to check for leaks or to identify hydraulic problems in the existing network.

A simple dc (6-21 V) connection can be hooked up to sources as small as a 5 W solar panel or 60 W equivalent wind supply. When coupled with its use of super capacitor energy storage technology, this feature totally eliminates the need for either mains or battery power, making AquaProbe with AquaMaster 3 transmitter suitable for use in even the remotest locations. In the mains-power mode of AquaProbe with AquaMaster 3, the SuperCap technology maintains continuous measurement and alarms reporting via SMS for up to 5 days in the event of a power failure. This is expanded to up to 3 weeks for the renewable power mode, with the SuperCap also acting to power the meter during the night.

A new development in the battery-only version of the AquaProbe with AquaMaster 3 is the option of an Alkaline-Manganese Dioxide Battery pack, offering an operating life of up to 5 years in standard applications. The new AquaProbe offers competitive features and benefits surpassing competitors at every stage of the process. The new design raises the bar to the next level for all clean water applications.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.