Industrial Ethernet switches support huge China water transfer project

What are key considerations to optimize your next industrial Ethernet implementation? Looking at how Ethernet is used in this China water transfer project could help with your next Ethernet project.

08/29/2011


Key considerations to optimizing an industrial Ethernet implementation are often application dependent. A very large project in China provides a good example of a project where industrial-strength products were absolutely mandatory and where Ethernet was chosen because of its ability to provide a long-term, easily deployed, and cost-effective solution.

Shanghai Bluebird M&E Co. Ltd. South to North Water Transfer Project completion is scheduled for 2050; network products must be future-proof. Courtesy: GarrettCom

The South to North Water Transfer Project is an ambitious century-long project that will bring water from southern China to northern China via three canal routes. Started in the late 1950s, and with final project completion scheduled for 2050, the project’s network products must be future-proof. Ethernet, the ubiquitous and standards-based networking protocol, was the obvious choice. Already more than 30 years old, Ethernet is a worldwide networking standard that has evolved to meet the changing requirements of networking while maintaining backwards compatibility. As the eastern route to Tianjin approaches completion, the network supporting this segment is being installed at a central control room in Henan Province as well as throughout all of the small control rooms located along the canal through Hubei, Henan, Hebei, and Beijing provinces. The design calls for a star topology with the hub in the central control room and redundant links connecting the series of industrial PLCs.

Fiber and copper cabling were used: copper for connectivity to the PLCs in the pump stations, and fiber from canal station to canal station, where its ability to transmit for distances up to 2 km at 100 Mbps and 70 km at 1 Gb made it the most viable choice.


The shortest (eastern) route stretches to Tianjin and is closest to completion. Full operation is expected within the next few years. To control and manage hundreds of pump stations, Shanghai Bluebird M&E Co. Ltd. needed to design a network to withstand extreme environments—with high temperatures and very dirty and dusty conditions. 

Bluebird chose a gigabit-managed backbone switch, configurable with up to 8 gigabit ports, for the central control center, and deployed smaller managed-edge switches and mixed-media managed Ethernet switches in the canal pumping stations. Bluebird wanted the flexibility of managed switches and noted that managed switch software supports cyber security features as well as industry-standard RSTP-2004 protocol for redundant meshes.

Because the field installations were often in areas that were dirty, dusty, and subject to exposure to water, all the switches chosen for the pumping stations required industrial-rated designs with convection cooling that supports an IP52 rating against dust and dripping water.

While no specific return on investment (ROI) calculation was reported, it makes sense to argue that to ensure a secure and continuous water supply from the water transfer project, factors such as standards-based for future proofing; the flexibility afforded from managed systems that could be monitored and modified from afar; and a high MTBF, along with redundancy and the ability to withstand harsh atmospheric conditions over long periods, thus reducing truck rolls for maintenance and service, helped in the final decision to use industrial-rated Ethernet switches.

Ethernet technology note: China Water Transfer Project, Shanghai Bluebird M+E

Shanghai Bluebird M+E Co. Ltd. chose GarrettCom Magnum 6K25e gigabit-managed backbone switch, configurable with up to 8 gigabit ports, for the China Water Transfer Project central control center. Smaller GarrettCom Magnum 6KQ managed-edge switches and 6K16 mixed-media managed Ethernet switches were used in canal pumping stations.

- Jim Krachenfels is GarrettCom marketing manager. Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com.

www.garrettcom.com 

www.garrettcom.com/app_notes.htm 

www.controleng.com/new-products/industrial-networks.html 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.