Fire alarm control panels

A new fire alarm control panel by Honeywell is designed to reduce installation/maintenance while increase its capabilities and life span.

06/08/2011


Fire-Lite Alarms by Honeywell has modernized two of its addressable fire alarm control panels with installer-requested features to reduce installation/maintenance time and enhance the systems' capabilities and life span. Version 3 of the MS-9200UDLS and MS-9050UD panels support more notification and ancillary devices while allowing for longer wire runs using most styles of wire. With fire alarm voice evacuation becoming more prevalent in the U.S. market, the number of speakers and strobes required has increased dramatically, creating a need for higher-capacity systems. On both panels, the addition of a second annunciator circuit, commonly used to tie in remote annunciators, printers, and more, allows for double the number of ancillary devices and double wire lengths that can be run in different directions using nearly any type of wire. A quick-remove chassis on both panels allows electronics to be removed from the backbox during the initial construction phase.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me