Execs on FABTECH panel see strong growth in 2013

Five CEOs will address convention Nov. 12

10/25/2012


Five CEOs who will be featured at a roundtable at the FABTECH exposition remain optimistic that the growth experienced by many manufacturers since 2010 will continue for a third year in a row. The roundtable is part of the special events planned for FABTECH 2012, November 12-14 in Las Vegas.

The CEOs include Jerry Ward, Vice President of Metcam, Inc.; Rick Taylor, president and CEO of Jay Industries; Gregg Simpson, president of Ohio Laser; Shivie Dhillon, president of SunDial Powder Coatings and Patrick Thompson, president of Trans-Matic Manufacturing.

In pre-show interviews, some CEOs agreed that materials supply will continue to be unpredictable, making it challenging to plan. For others, energy costs are a greater concern. However, despite this uncertainty, the CEOs all agreed that their companies expect to continue the growth that they have experienced in the last two years. Some of the CEOs predicted strong growth of 20% or more, while others are expecting slow, but steady growth in the coming year or two. 

The roundtable featuring these industry leaders, entitled State of the Industry: Manufacturers’ Executive Outlook, will take place Nov. 12 at 12:30 p.m. Dr. Chris Kuehl, economic analyst for the Fabricators & Manufacturers Association, International, will moderate the panel.

“The CEO roundtable will have something for everyone - whether you’re in the metal forming, fabricating, welding or finishing industries, or involved in some other sector of manufacturing,” said John Catalano, the show’s co-manager. “These CEOs are all distinguished leaders and bring varied perspectives on manufacturing. This makes the roundtable a ‘can’t miss’ event at FABTECH.”



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.