EtherNet/IP network added to motor control centers

Allen-Bradley NEMA and IEC Centerline low-voltage motor control centers provide seamless information exchange between plant floor devices and business-level systems to increase productivity and improve worker safety.

04/23/2011


Rockwell Automation added EtherNet/IP to its Centerline motor control centers (MCCs). With the features of an integrated EtherNet/IP network, manufacturers now have access to production information throughout the enterprise and can take advantage of simplified device programming with Premier Integration.

Leveraging one, standard network simplifies communication for the enterprise and provides users with the flexibility to control, configure and collect data from any point in the system, Rockwell Automation said. In addition, by taking advantage of Premier Integration, users can configure and commission their MCC faster with RSLogix 5000 software, helping to eliminate errors associated with redundant programming.

Furthermore, the Ethernet connection allows Centerline MCC users to access information remotely. This allows personnel to safely monitor, troubleshoot and diagnose the MCC without exposing them to potentially dangerous conditions and power equipment. Knowing how a motor control center is performing from anywhere also saves time by minimizing the need for maintenance personnel to enter the motor control center. This reportedly saves time associated with suiting up with personal protective equipment and helps protect personnel from exposure to hazardous conditions.

Designed to meet global standards, Centerline low-voltage MCCs offer a rugged, high-performance packaging solution to meet all of a manufacturer’s motor control needs. With embedded IntelliCenter technology, Centerline MCCs use a pre-configured and pre-tested network with integrated hardware and software. This level of integration helps reduce installation time with its plug-and-play set-up, and can help minimize facility downtime by quickly providing intelligent diagnostic and predictive failure information. 

www.rockwellautomation.com

Rockwell Automation Inc.

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me