Embedded Vision System supports PoE

PoE support reduces cabling complexity for M40 processor by eliminating the necessity for camera power cables; reducing costs, enhancing system reliability.

01/04/2011


PPT Vision - Embedded Vision SystemPPT VISION’s IMPACT M-Series Embedded Vision System features Power over Ethernet (PoE) support, delivering network reliability and significantly simplifying the installation and maintenance of networked devices. Using standard CAT 5 Ethernet cables, system cameras are powered from the embedded M40 processor—which eliminates the need for a separate computer for programming and processing and individual data and power cables. Limited cable wiring decreases installation and wiring expenses, while providing a more clear and safe workspace for operators and equipment. PoE allows for increased system flexibility with the ability to install virtually anywhere, allowing devices to be located at distances over 100 meters from a power supply.

Using uninterrupted power supply (UPS), PoE ensures the reliability and availability of the IMPACT M-Series cameras operating on the M40 processor. This combination facilitates continuous operation, eliminating power interruptions and costly system downtime.

“PoE support delivers a simple and reliable camera solution for the IMPACT M-Series Embedded Vision System,” said PPT VISION Chief Executive Officer Bob Heller. “Combining power and data into one cable allows for a scalable and flexible networking infrastructure, while providing significant time and cost savings.”

Delivering increased precision and speed to automated inspection, guidance and identification production processes, the IMPACT M-Series Embedded Vision System allows up to four M-Series Smart Cameras to perform independent asynchronously-triggered inspections. Utilizing the single M40 vision processor, the IMPACT M-Series eliminates the need to purchase and install multiple cameras—saving additional costs and reducing setup and networking time. The IMPACT M-Series benefits manufacturing industries ranging from electronics, pharmaceutical, and medical devices to consumer products and automotive. Typical applications include inspecting electronic connectors, correct part seating during die stamping, and detection of fill level and cap position on bottles.

http://www.pptvision.com/ PPT Vision



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me