Electronic circuit breakers, power supplies, UPSs get UL Certified

UL and cUL Certification is complete for 27 models within Wago Corporation’s Epsitron family of advanced power supplies. Certification applies to select models within the Epsitron Electronic Circuit Breaker, Pro-Power Supply, Uninterruptible Power Supply and Redundancy module lines.

12/10/2010


UL and cUL Certification is complete for 27 models within Wago Corporation’s Epsitron family of advanced power supplies. Wago Epsitron family of advanced power supplies, received UL and cUL Certification. Certification applies to 27 models within the Epsitron Electronic Circuit Breaker, Pro-Power Supply, Uninterruptible Power Supply, and Redundancy module lines.

787 Series Epsitron Electronic Circuit Breakers (ECBs): 4-channel ECBs separately protect up to four current paths (up to 10A at 24 V dc max each) for power supplies without “topboost.” Ideal for multiple loads from one power supply, ECBs independently program load-appropriate current ratings and trip times. ECBs also offer remote resetting of tripped channels.  

787 Series  Epsitron-Pro-Power Supplies: 1- and 3-phase Primary Switch Mode PRO Power Supplies process power peaks in systems with high-output requirements. Features: 93% efficiency, PowerBoost and TopBoost functions; select models also offer free configuration/monitoring software and Line Monitor capability, Wago said.

787 Series Epsitron Uninterruptible Power Supply (UPS): UPS modules shield complex automation systems and components from common disturbances (e.g., voltage fluctuations, harmonic distortion and outages). Features: free configuration and monitoring software and LCD/keypad and RS-232 interface.

787 Series Epsitron Redundant Modules: The 787 Series redundancy modules safeguard two power supplies that are parallel-connected, providing system redundancy or additional power.

Wago provides spring pressure connection technology that eliminates loose wires resulting from vibration and temperature cycling, while providing highly reliable, corrosion-resistant and maintenance-free connections. Other products include DIN-rail, PCB and chassis mount terminal blocks; signal conditioners; the Wago-I/O-System; among other.

www.wago.us

- Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me