DOE amends efficiency standards

The DOE has issued new efficiency standards for water heaters, direct heating equipment, and pool heaters.

04/02/2010


 

The U.S. Dept of Energy (DOE) is amending the existing energy conservation standards for residential water heaters, gas-fired direct heating equipment, and gas-fired pool heaters. It has determined that the amended energy conservation standards for these products would result in significant conservation of energy, and are technologically feasible and economically justified.

According to the Air-Conditioning, Heating, and Refrigeration Institute, the new minimum standards for lower-volume gas storage units is a little lower than what was originally proposed, while the new minimum standards for higher volume electric and gas storage water heaters are appreciably higher than the original proposed level. In the case of higher-volume electric storage units, for example, the final rule sets a minimum efficiency level more than twice as high as what was originally proposed and will, de facto, require heat pump technology.

The pool heater revised minimum is lower than the level proposed in December. The final direct heating equipment requirements are lower than the proposed levels but still increase the current requirements.

Read the full DOE final ruling.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me