Control line lightning and surge protectors

L-com's single stage AC/DC control line lightning and surge protectors protect 8 individual single-ended AC or DC control lines using grounding lugs to provide tie points.

02/27/2012


L-com's single stage AC/DC control line lightning and surge protectors protect 8 individual single-ended AC or DC control lines using grounding lugs to provide tie points. Courtesy: L-comL-com Inc. has added a series of single stage ac/dc control line lightning and surge protectors. The new products protect 8 individual single ended ac or dc control lines using grounding lugs to provide tie points for earth ground. They all feature removable screw terminal strips for easy installation.

Lightning and surge protectors are necessary for many wired connectivity lines. They protect sensitive electrical equipment on either end of a cable from transient voltage, or spikes, which may be caused by lightning strikes and other factors. AC and DC control lines are used in a range of applications and are commonly found on measurement and control equipment, computers, motor controllers and industrial automation equipment.

The ac protectors feature Metal Oxide Varistors (MOV), while the dc protectors feature uni-polar Transient Voltage Suppression (TVS) Diodes rated at 1500 Watts.

L-com Inc.

www.l-com.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me