Control Engineering webcast, the Complex Simplicity of Ethernet, offers application advice

Advice for using Ethernet in industrial environments will be among knowledge shared in a Control Engineering webcast, the Complex Simplicity of Ethernet. Advice includes use of Ethernet in industrial applications, when redundancy is needed, streaming SCADA video for gauge verification; and Ethernet safety.

10/11/2010


NOW AVAILABLE on demand using the link below: Advice for using Ethernet in industrial environments will be among knowledge shared in a Control Engineering webcast, the Complex Simplicity of Ethernet.

The Thursday, Oct. 19, 2010, at 2 p.m. ET/1 p.m. CT/11 a.m. PT also will be available for viewing in the Control Engineering webcast archive. Register for the live event or view the archived information at www.controleng.com/webcasts.

Ethernet application advice includes the following:

  • Ethernet can make industrial networks better and easier to use;
  • Some applications will benefit from a redundant Ethernet architecture;
  • SCADA Ethernet applications can stream video to verify why an alarm is going off, confirming gauge readings;
  • Harsh-duty Ethernet hardware can add reliability in rugged environments; and
  • Ethernet use can benefit safety applications.

The Control Engineering webcast is sponsored by Molex and Moxa.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me