CANopen enabled servo motor controller

Low cost CANopen servo motor controller, Silverdust IGC, from QuickSilver Controls Inc., is a single axis controller which can be configured for peer-to-peer, master, or slave, allowing the controllers to share I/O with other CANopen enabled Silverdust controllers or third party CAN-open devices. The controller includes serial communications (RS-232, RS-485), CANopen, and 7 I/O.

08/01/2007



Low cost CANopen servo motor controller, Silverdust IGC, from QuickSilver Controls Inc., is a single axis controller which can be configured for peer-to-peer, master, or slave, allowing the controllers to share I/O with other CANopen enabled Silverdust controllers or third party CAN-open devices. The controller includes serial communications (RS-232, RS-485), CANopen, and 7 I/O. The serial network runs in parallel to CANopen for supervisory control from a host.

The IGC is designed to serve Quicksilver’s NEMA 17 and NEMA 23 frame I-grade servo motors and includes breakouts for power and communications. For a multi-axis system, several IGCs can be connected with one as the master and the others receiving motion commands over CANopen. The controller features 12-48V DC input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32K non-volatile memory. www.QuickSilverControls.com QuickSilver Controls





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me