AEC M&A activity: 2012 first six months in review

Domestic M&A activity rebounds to 2011 pace; Domestic M&A activity clustered in key 12 states; Canadian AEC M&A market continues to sizzle; Domestic inter-state M&A activity remains at defensive levels; U.S. buyers continue to look to international growth; Publicly-traded firms still keeping power dry

07/23/2012


Graph 1: Domestic M&A activity, Source: Morrissey GoodaleDomestic M&A activity rebounds to 2011 pace: Domestic M&A activity rebounded in the second quarter, bringing the pace for the first half of the year in line with the prior years (Graph 1). However, the 88 deals announced in the U.S. through the end of June essentially reflect a pace of consolidation that is stuck at 2009 levels— which was the lowest point on record. This should cause concern about the strength of the economic recovery in the industry.

The big question is whether the momentum of Q2 (after a very slow Q1) will continue through the second half of the year. In large part that will be determined by how attractive the publicly-traded firms view the U.S. marketplace. As of late, the publics are tending to view overseas markets as relatively more attractive.

With six months to go in the year, we anticipate domestic M&A activity to be in the 175 to 195 deal range.

 

Graph 2: Top states for firm sales, Source: Morrissey GoodaleDomestic M&A activity clustered in key 12 states: Regionally, California and Texas registered the highest number of deals (nine in each state) for the first half of the year (Graph 2). Twelve states, including Texas and California represented almost 7 in 10 of all domestic deals during the first half of the year. Of note are the six deals in Florida— a sign that that market has likely hit and moved beyond the bottom.

 

 

 

 

Graph 3: Top international countries for firm sales, Source: Morrissey GoodaleCanadian AEC M&A market continues to sizzle: Although the Canadian AEC market is just 10% the size of that in the U.S., consolidation in Canada continued at a blistering pace during the first half of the year. We recorded twenty-three deals there through end of June (Graph 3). This torrid pace was driven in large part by the attractiveness of the booming energy sector and robust infrastructure markets in Western and Eastern Canada. Non-Canadian firms are lining up to get in on the action.

 

 

 

 

Graph 4: Interstate M&A activity, Source: Morrissey GoodaleDomestic inter-state M&A activity remains at defensive levels: For the first six months of the year, domestic inter-state deal-making activity remained in a relatively defensive posture with just 56% of deals occurring across state lines (Graph 4). This was down from 58% of domestic deals for the same period in 2011. We consider a pace of over 66% as representing a clear growth-oriented deal making environment.

 

 

 

 

 

Graph 5: Deal flow in and out of U.S., Source: Morrissey GoodaleU.S. buyers continue to look to international growth: The first half of the year saw U.S. buyers announce eleven overseas acquisitions on pace with last year— a distinctly higher number than prior years (Graph 5). This in indicative of what we continue to hear from the largest firms in the industry — that more and more they see overseas as yielding greater opportunities for growth until the U.S. Political and economic outlook has greater clarity.

Conversely, U.S. firm sales to international buyers continued their decline from the highs of 2007 and 2008. Just five U.S. firms sold to non-U.S. buyers in the first six months of the year continuing a downward trend. While overseas buyers still consider the U.S. market attractive, they too see their M&A priorities as being in the rich energy and natural resources markets of Canada, South America, MENA, South Africa, Australia and New Zealand.

 

Graph 6: Percentage of domestic transactions involving a public , Source: Morrissey GoodalePublicly-traded firms still keeping power dry: Domestically, less than one in ten deals involved a publicly-traded buyer (Graph 6). This represents the lowest level of activity on the part of publics in the first half of the year since the dark days of 2009. 

Globally, publicly-traded firms were also “under-represented” compared to historical performance. Through the end of June, publics accounted for just over one-in-four deals, their most muted performance since the first half of 2007 (Graph 7).

Graph 7: Percentage of global transactions involving a public , Source: Morrissey Goodale 


 Morrissey GoodaleContent provided by Morrissey Goodale



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.