New Products

Simulator is designed specifically for the industrial and commercial heat control industry to simplify setting up a burner control system and verify its proper operation. The unit's UV scanner signal output interfaces to almost any UV-type control. (Quanta-Flame by GN Electronics)

Data loggers are battery-powered and high-resolution, and measure temperature, relative humidity, light intensity and other indoor environmental conditions. High-precision sensors enable long-term data accuracy, and 12-bit resolution provides high-res measurements for detecting greater variability in recorded data. (HOBO U12 by Onset Computer Corporation)

Fire controller can be configured without a display or with a 640-character multi-line LCD. It supports a full line of remote annunciators, programming tools, modular configuration options and intelligent detector technology. It also supports applications requiring multi-channel voice evacuation capabilities. (IFC-3030 by Johnson Controls)

Liquid-to-steam humidifier has been redesigned to include the following new capabilities: a temperature sensor that enables the controller to hold water at a preset temperature, allowing a rapid response to a call for humidity; data reports to monitor humidifier performance; and a real-time clock that allows time-stamped alarm tracking. (LTS by Dri-Steem)

Fluorescent luminaires are suited for high-mount applications where high lumen output is required. The fixtures offer uniform brightness control, high system efficacy, 95% lumen maintenance and instant-on/instant-restrike. (Metalux F-Bay by Cooper Lighting)

AC power switch combines redundant power switching, undervoltage sensing and "out of phase" source switching, allowing AC power sources that are not phase-synchronized to be switched. The unit accepts two AC power inputs. Its intelligent circuitry monitors both inputs and can transfer power to the secondary power source if primary power is lost. (T2235 Series by Pulizzi Engineering)

Humidity control unit is designed to treat 100% makeup air and works in conjunction with existing air conditioning or energy recovery ventilator units. It controls humidity on an as-needed basis, when humidity levels exceed setpoint. (HCU by Munters Corporation)