Gaseous-fueled units receive standardized engine

The 9.0 L engine is now standard with the 100 tp 150 kW gaseous-fueled industrial configured gensets and is designed to improve turnaround times and power density.

10/07/2014


The 9.0 L engine is now standard with the 100–150 kW gaseous-fueled industrial configured gensets and is designed to improve turnaround times and power density. Courtesy: Generac Power SystemsGenerac Power Systems' 100 to 150 kW gaseous-fueled industrial configured gensets are now receiving the 9.0 L engine as standard. The 100 to 150 kW generators are direct drive, with both the engine and alternator operating at 1800 rpm. Generac’s 9.0 L engine is a turbocharged, after-cooled V8 engine designed to accommodate gaseous fuel. All 100 to 150 kW generators are factory EPA certified for stationary emergency power and SCAQMD certified. The 100 to 150 kW gaseous-fueled generators are listed to UL2200 and are available in open-set, weather-protected, and Level 1/Level 2 sound attenuated enclosures. The 9.0 L engine is designed to help improve turnaround times and power density for the gensets.

Generac Power Systems

www.generac.com 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me