Video: Key issues and drivers in automation

Automation trends, issues, and advice are covered in a short Molex video with Control Engineering.

12/12/2011

Flash is required!

Larry Wegner, Molex, interviews Mark T. Hoske, Control Engineering content manager, CFE Media, in a brief YouTube video, posted by Molex.



Molex turned the camera around on Control Engineering and asked for a quick perspective of current trends and issues in automation and controls.

Mark T. Hoske, Control Engineering content manager, takes a few minutes with Larry Wegner from Molex to review issues and market drivers and offer a bit of advice for those using and integrating automation technologies.

http://www.youtube.com/watch?v=DSjAmC6QFFc&list=UUIlXh8KCgJqzPNELSrQ6rwQ&feature=plcp 

See other Hoske views in the Control Engineering “Think Again” column. http://www.google.com/search?q=%22Think+Again%22+site%3Awww.controleng.com&hl=en&biw=1366&bih=569&num=10&lr=&ft=i&cr=&safe=images

Also see Michael Frayne, Molex product manager, discussing the demo that he has on display at the Molex booth, also at Rockwell Automation Fair 2011. The demo shows the ability to scan a network, diagnose problems on a network, and integrate with the Rockwell system.

http://www.youtube.com/watch?v=LLCLmHX0v8o&list=UUIlXh8KCgJqzPNELSrQ6rwQ&feature=plcp 

www.molex.com 

www.automationfair.com 

http://controleng.com/videos 

Larry Wegner, Molex, interviews Mark T. Hoske, Control Engineering content manager, CFE Media, in a brief YouTube video, posted by Molex.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me