Valveless pump for gearbox lubrication

The PDS-100 by FMI provides metering high viscosity grease at low pressure for precision lubrication of industrial robot gearboxes.


The PDS-100 by FMI provides metering high viscosity grease at low pressure for precision lubrication of industrial robot gearboxes. Courtesy: Fluid MeteringThe PDS-100 Programmable Dispensing System by Fluid Metering utilizes FMI's valveless pumping design to accurately deliver gearbox lubricating grease, independent of viscosity. The PDS-100 is able to accomplish this at pressures low enough to prevent any seal damage to industrial robot gearboxes.

The PDS-100 is available in single and dual channel configurations and is easily integrated with industrial process controllers. Dispense and metering rates range from a few microliters per dispense up to 768 ml per minute continuous metering.

Fluid Metering, Inc. 

- Edited by Control Engineering. See more Control Engineering products.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me