UV Leak Detection Lamp offers spot-beam, broad-beam coverage

Spectronics Corporation offers BIB-150P UV Inspection Lamp, detects industrial leak;, concentrated spot bulb, broad-beam bulb provide versatility

01/06/2011


Spectronics Corporation produces the BIB-150P ultraviolet inspection lamp. This hand-held UV lamp, with its unique 150-watt Built-In-Ballast bulb, is ideal for pinpointing industrial leaks such as oil, hydraulics, refrigerant, gasoline, diesel fuel or water.Spectronics BIB-150P Lamp

Simply add the appropriate fluorescent dye and let it circulate with the specific lubricant. The dye will escape with the host fluid wherever there is a leak. When the system is scanned with the BIB-150P, the dye will glow brightly at the leakage area.

The housing on the BIB-150P is constructed of a super-strong engineering polymer that is reportedly dent-proof and impact-resistant. The lamp’s filter is crack-resistant and is protected by a filter holder that is easily removable for bulb and filter maintenance. The ergonomically designed handle is positioned for better balance, easier handling and reduced hand fatigue over long periods of use.

The unit can be supplied with a concentrated spot bulb for an intense UV beam that produces a nominal steady-state 365nm intensity of 4,500 µW/cm² at 15 in/38 cm. If wider-area coverage is needed, the broad-beam spot bulb should be used; this bulb produces an intensity of 4,000 µW/cm² at 15 in/38 cm. Both bulbs have an average rated life of 5,000 hours and can withstand rough use.

www.spectroline.com

Spectronics Corporation



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me