Tech Industry adds 30,200 jobs in first half of 2010

Tech Manufacturing, Software Services, and Engineering and Tech Services all add jobs, according to a TechAmerica Foundation report based on U.S. Bureau of Labor Statistics data. The report looks at tech manufacturing, communications services, software services, and engineering and tech services.


U.S. high-tech industry added 30,200 jobs between January and June 2010, a 0.5% gain, according to a TechAmerica Foundation report based on U.S. Bureau of Labor Statistics data. The report looks at four sectors within the high-tech industry: tech manufacturing, communications services, software services, and engineering and tech services.

“Though the tech industry was among the last to feel the effects of the economic downturn of 2008 – 2009, it was not immune to job loss and is only slowly showing signs of climbing out of it,” said Josh James, Vice President, Research and Industry Analysis, TechAmerica Foundation. “Tech employment as of June 2010 stood at 5.78 million, compared to 5.99 million in January 2009. So there is still a way to go before we’ve made up for lost jobs, and continued recovery is by no means certain. With job growth in three of the four tech sectors, we remain guardedly optimistic.”

“As one of the last industries to feel the effects of the recession, the technology industry is now appears to be slowly turning the corner with the rest of the economy,” said TechAmerica President and CEO Phil Bond. “We have weathered the storm better than most. From its position embedded in every other industry, technology remains the best hope for driving robust recovery across the economy. America can only realize the full promise of an innovation recovery with smarter public policies focused on developing and attracting the best talent, investing in research and development, and growing and securing our information infrastructure.”

The technology industry continued to add jobs until the last quarter of 2008, by which time much of the rest of the private sector was already well into recession.

Over the most recent six months, high-tech manufacturing in the United States once again added jobs, reversing the downward trend. Technology manufacturers added 9,100 net jobs in the first half of 2010, for a total of 1.24 million tech manufacturing jobs in June – a 0.7 percent gain.

Two of the three high-tech services sectors added jobs in the first six months of 2010: software services (+14,200) and engineering and tech services (+29,700). Communications services, which includes Internet and telecom companies, shed 22,800 jobs from January to June of 2010.

On a year-to-year basis, from June 2009 through June 2010, tech lost 72,800 jobs, a 1.2 percent workforce decline. Over the same time period the U.S. private sector shed 334,000 jobs – 0.3 percent decline.

- Also see:

Smart manufacturing technologies, administration, public and private partnership work to revitalize U.S. manufacturing;

Intel-led $3.5 billion Invest in America Alliance helps U.S.-based tech companies; and

Siemens Automation Summit: Cost-effective ways to reduce risk, limit cost, improve effectiveness

- Edited by Amanda McLeman, Control Engineering, CFE Media,

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.