Research on regenerative drives and low harmonic solutions

IMS Research suggests the Asia Pacific region could grow by as much as 18% in 2011 in the area of regenerative drives and low harmonic solutions.

07/19/2011


The Asia Pacific region is poised for 2011 growth of 17.8% in the area of regenerative drives and low harmonic solutions, according to a new market report, "The World Market for Regenerative Drives & Low Harmonic Solutions" from IMS Research. China in particular will see grow in these areas across many different industry sectors, unlike other developed countries that focus harmonic standards on specific industries, such as water and wastewater and commercial HVAC.

Harmonic standards are regulated differently by country, and this often affects which industry sectors will require harmonic mitigation. “Asia Pacific is the largest regional market for harmonic filters, representing 41.4% of sales in 2010, due to the region’s poor power quality in relation to Europe and to a lesser extent the United States,” said IMS Research analyst Sarah Sultan. “In addition, industrial standards regulate harmonics for heavy industry in China leading to increased demand for harmonic solutions across multiple industries.”

IEEE 519 is a U.S. harmonic standard that regulates harmonic distortion at the point of common coupling. As a result, industries most affected by this requirement are ones nearest in proximity to the consumer power grid, such as water and wastewater and commercial HVAC. Similar IEC standards in Europe regulate voltage distortion at the major input to the plant, forcing all heavy industry to regulate harmonics. However, due to higher power quality in Europe, harmonic concerns tend to be less of an issue than in other major regions. Asian countries use a combination of IEC standards and IEEE 519.

As a result, growth for low harmonic solutions is highly dependent on regulation and enforcement of harmonic mitigation standards, which can be enforced by the country’s government, the state or province government, or by the individual utility company. While the global market is predicted to have a strong performance in 2011, growing approximately 14.0%, many of the countries in the Asia Pacific region will outpace overall market growth as a result of more stringent standards and enforcement.

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me