Narrow timer relays have labeled thumb wheel to set time

The ETD-BL narrow timer relays by Phoenix Contact are 70% narrower than conventional timer relays and and feature a labeled thumb wheel for precise time settings.

04/13/2012


The ETD-BL narrow timer relays by Phoenix Contact are 70 percent narrower than conventional timer relays and and feature a labeled thumb wheel for precise time settings. Courtesy: Phoenix ContactPhoenix Contact’s range of narrow single-function timer relays, the ETD-BL, is designed to save valuable cabinet space. They measure just 6.2 mm, up to 70% narrower than conventional timer relays.

The relays have a labeled thumb wheel at the front to ensure precise time settings. To protect against unintentional adjustments, the wheel is recessed into the casing and can be adjusted using a screwdriver. Time settings range from 0.1 to 5 seconds and have four functions for easy customization.

The 24 V dc timer relays transmit output signals by using a floating change-over contact. Equivalent potentials can be quickly connected using a plug-in bridge system from Phoenix Contact’s PLC relay product range. An optional PLC-V8 adapter can connect the relays to Varioface system cables quickly and securely.

The new compact timer relays can eliminate the need for mini controllers in some applications. They require no software programming, saving both time and money. Only one selection of time parameter is all that is needed.

Phoenix Contact

www.phoenixcontact.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me