Metering utility plant's power

12/01/2009


 

View the full story, including all images and figures, in our monthly digital edition

 

Southern California Edison (SCE) serves more than 13 million customers in 11 central, coastal, and southern California counties. In the southern half of SCE's service territory lies the Inland Empire, which is an area of 27,298 sq miles of commercial, industrial, and residential zones. The rapid growth of the area presented a critical need for electrical power in the wake of frequent deregulation blackouts and brownouts during the early part of the decade. In early 2006, the area's need for additional power was met by the completion of the Mountainview generation facility in Redlands, Calif. The Mountainview facility, which was the state's first new utility-developed power plant in 15 years, provided 1,054 MW of additional capacity to the grid.

 

Once operational, the utility launched a series of measures to improve service efficiency, while increasing responsiveness to regional power emergencies. As part of the process, SCE will construct 10 new customer service centers throughout its 50,000 sq-mile-service territory. In 2009 SCE opened its first service center in Wildomar, Calif. The new 97,553-sq-ft Wildomar facility features two multi-level main buildings and a single-story structure in the service yard.

 

Designed by Elements Architecture of San Juan Capistrano , the $38 million plant features solar panels installed over the service yard to generate electricity for the fuel dock, overhead lights, and other circuits. The plant uses energy-efficient lighting that automatically adjusts based on natural light levels during daylight hours. The energy-efficient measures helped the building receive a LEED-Gold certification from the U.S. Green Building Council.

 

In order to meet the LEED requirements for measurement and verification of a facility's energy envelope, the Wildomar facility selected D-Mon electric submeters from E-Mon LLC , Langhorne, Penn. Sunwest Electric, based in Anaheim, Calif., specified 277/480 V, 3-phase/4-wire E-Mon D-Mons to monitor electrical consumption (kWh) and demand (kW). Sunwest placed two meters on the 200 A circuits, one on the 1,600 A circuits, and one on the 3,200 A circuits in the three main buildings and the main switch board.

 

The submeters communicate raw energy data every 15 min. to the energy manager's PC via the facility's Ethernet local area network. “The E-Mon D-Mons were installed to see how much power is being consumed in each building and to compare this usage to similar non-green buildings,” said Sunwest Electric project foreman John Richards. “Benchmarking the energy-efficiency measures that were implemented in this facility will serve as a prototype for other service centers in the near future.”

 

The submeters allow commissioning agents to use the energy intelligence software to identify functionality and performance of electric, water, and gas systems. For new construction, like the Wildomar facility, the submeters provide a baseline facility energy performance to compare with that of other buildings of similar size and type. The D-Mon submeters helped the Wildomar facility collect LEED points in Commercial Interiors, Core & Shell, and Energy and Atmosphere sections.

 

 

 

Acknowledgements

Information provided by E-Mon LLC.

 

 

AT A GLANCE

At the new Mountainview customer service in Wildomar, Calif., the use of electric submeters to measure the facility's power usage helped contribute to its LEED-gold certification from the U.S. Green Building Council.

 

Sunwest Electric specified 277/480 V, 3-phase/4-wire E-Mon D-Mons to monitor electrical consumption (kWh) and demand (kW). Two meters were placed on the 200 A circuits, one meter was placed on the 1,600 A circuits, and one meter was placed on the 3,200 A circuits.

 

The submeters help the building's energy manager monitor the building's energy use by communicating raw energy data to a PC via the facility's Ethernet local area network.

 

The submeters helped the Wildomar facility collect LEED points in Commercial Interiors, Core & Shell, and Energy and Atmosphere sections.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.