Manufacturing IT book expands on Control Engineering advice from Dennis Brandl

Plant IT: Integrating Information Technology into Automated Manufacturing, a book by Momentum Press, expands upon many Control Engineering manufacturing IT columns by Dennis Brandl.

12/14/2012


Plant IT: Integrating Information Technology into Automated Manufacturing, a 152-page book by Momentum Press by Dennis L. Brandl and Donald E. Brandl. Courtesy: Momentum PressInformation Technology is an important element of plant floor operations, and Dennis Brandl’s monthly column on Manufacturing IT in Control Engineering magazine covers IT aspects that are critical to modern manufacturing. A new book, Plant IT: Integrating Information Technology into Automated Manufacturing, by Momentum Press, expands on the information presented in “Engineering and IT Insight,” Control Engineering’s manufacturing IT column. The book describes the wide range of information technologies that manufacturing professionals need to understand to effectively operate in the corporate IT environment.

Each section of the book discusses an IT issue that is important to a manufacturing company, including practical programming, real world design considerations, databases and master data management, knowledge management, tools and programming languages, cyber security, managing resource information and regulations, Brandl said. These topics will allow manufacturing professionals to intelligently discuss IT elements with their IT partners, so that IT can be effectively applied in plant floor operations without impacting production productivity or product quality, he said.

“Software engineering is a foundation for all IT elements, yet many manufacturing engineers are tasked with software development, when software development is not their area of training. Therefore, this book also covers important aspects of software engineering and software project management for non-software engineers that must manage or participate in IT projects,” Brandl said. It also provides a strong background for using information technology to advance and improve plant floor operations.

Dennis Brandl is founder and chief consultant at BR&L Consulting Inc., specializing in manufacturing automation, manufacturing operations, and manufacturing IT. He is an internationally recognized expert in manufacturing operations management (MOM), manufacturing execution systems (MES) and batch control.

Donald Brandl, co-author of the book, has a master’s degree in physics and works at Epic Systems Corp. He has designed, built, and tested detector, calibration, and other components for advanced aerospace and laboratory applications.

- Edited by Mark T. Hoske, content manager CFE Media, Control Engineering, Plant Engineering, and Consulting-Specifying Engineer, mhoske@cfemedia.com.

ONLINE

Plant IT: Integrating Information Technology into Automated Manufacturing, a book by Momentum Press

www.momentumpress.net/advanced-search?terms=&tid=All&author=brandl&title

Best system integration advice for engineering, controls, and IT

www.controleng.com/home/single-article/best-system-integration-advice-for-engineering-controls-and-it/07cbf9b7b7e6fdd77cadf4a077388f02.html



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me