Machine vision growth continues

IMS Research analyst John Morse believes machine vision is going to grow up to 10% in 2011, continuing a double-digit trend.

08/19/2011


Growth in machine vision revenues is projected to continue, though "shows signs of slowing," says John Morse, senior analyst at IMS Research. He continued that this was not entirely unexpected following the dramatic recovery during 2010 from recession. Quoting from IMS Research’s Machine Vision 2011 report, he continued by saying that he had estimated that during 2010 global revenues grew by nearly 40%, fully recovering from the devastating fall during 2009.

Morse further commented: “This leveling of growth rate is no surprise and was forecast in the latest edition of the report, published in February this year. What is a bit surprising is the sharp decline detected in the first half year results from the IMS Research machine vision quarterly market tracker, particularly in the Americas and Asia. EMEA seems to be holding up better at this time.

"The completion of re-stocking following the downturn is a likely factor contributing to this slowing of growth rate. Global revenues are still projected to grow about 10% in 2011, compared with IMS Research’s estimate for global industrial activity which is projected to grow 7-8%. The longer term prospects for machine vision are forecast to be better but the warning signs suggest there is no room for complacency. We will continue to monitor the situation closely through our tracking activities.”

www.imsresearch.com 

IMS Research

- Edited by Chris Vavra, Control Engineering, www.controleng.com

See the Control Engineering collection of machine vision articles.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.