Industrial wireless receiver for material handling, heavy transportation applications

Honeywell’s Limitless Wireless Din-Rail Receiver connects up to 14 limit-less inputs to programmable logic controllers.

06/29/2011


Honeywell Limitless WDRR. Courtesy: Honeywell InternationalHoneywell recently introduced its new Limitless Wireless Din-Rail Receiver (WDRR) for industrial, construction, machine, material handling, and heavy transportation applications, including agricultural equipment, cranes, lifts, conveyors, grain diverters, and door positions.

The new WDRR is a din-rail or panel-mountable receiver designed to receive wireless signals from up to 14 different position-sensing switches and communicate the individual switch status to a programmable logic controller (PLC) or any controllers capable of receiving NPN/PNP inputs.

Limitless wireless switching can reportedly save up to 60% compared to traditional wired switching by reducing installation time, conduit, wire, clips, and other accessories. Limitless also enables sensing capabilities where it is impossible or very difficult to run cabling, according to Honeywell.

The Limitless wireless network is an easy-to-implement solution for those looking for a cost-effective and reliable switching solution. It includes the WDRR and WPMM receivers, the WLS and WGLA limit switches, utilizes the global, license-free RF wireless 802.15.4 WPAN protocol, provides up to a 305 m (1000 ft) line-of-sight communication range, and prolongs battery life with advanced power management technology.

Honeywell International

sensing.honeywell.com

- Edited by Kelsey Kirkley, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me