Inductive ring sensors: 10 mm, 15 mm, 25 mm diameters

Balluff inductive ring sensors are available in 10, 20 and 25 mm diameter openings and are designed to monitor the infeed of small metal parts like nails and screws.

10/14/2011


Balluff inductive ring sensors can help whenever the infeed of small metal parts needs to be monitored. These ring sensors are easy to install and they can be mounted side-by-side or stacked.

Balluff's inductive ring sensors, available in 10, 15 and 25mm diameter openings. Courtesy: BalluffAvailable in 10, 15 and 25 mm diameter openings, these sensors offer sensitivity adjustment and the ability to adjust the duration of the output signal. Balluff’s ring sensors are connected with an M12 connector and have one LED for power and a separate LED for function indication.

 Typical applications include:

  • Detection of nails, screws, welded studs or similar items
  • Ejection monitoring
  • Part counting
  • Wire-breakage monitoring
  • Nail machines for pallet manufacturing
  • Infeed monitoring in assembly technology
  • Jam detection of feed tubes

www.balluff.com

Balluff Inc.

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

See the Sensor Channel at

http://www.controleng.com/new-products/sensors.html



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.