Hydrogen sulfide gas detector receives IP66/67 approval

Det-Tronics's NTMOS hydrogen sulfide detector received an IP66/67 approval rating, which allows it to be used in petrochemical, oil and gas applications

01/13/2012


The NTMOS H2S gas detector (shown with the FlexVu Universal Display) has recently earned an ingress protection rating of IP66/67. Courtesy: Det-tronicsDetector Electronics Corporation (Det-Tronics) announced that its Nanotechnology Metal Oxide Semiconductor hydrogen sulfide gas (NTMOS H2S) detector has earned approval for use in locations that require an ingress protection rating of IP66/67, ideal for petrochemical, oil and gas applications. This rating was achieved as a result of the detector’s mechanical design, which protects the components against dust and forceful water during operation.

The certification joins the list of other previously obtained approvals and certifications for the NTMOS H2S gas detector, including CE, CSA, ATEX, IECEx, FM tested and certified to ISA-92.0.01.

In addition to multiple certifications, the NTMOS boasts a life-saving, speed-of-response performance that detects H2S in six seconds (T20) and delivers a detection solution in challenging environments where electrochemical sensing technologies are not preferred.

Detector Electronics Corporation (Det-Tronics)

www.det-tronics.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me