Continued process automation growth predicted in 2012

ARC Advisory Group predicts continued annual growth in process automation in 2011 through the forecast period of 2015.

01/23/2012


The year 2010 was an important year for the overall automation market as it saw a return to growth for many automation products and suppliers. ARC Advisory Group predicts continued annual growth in process automation in 2011 through the forecast period of 2015.

The timing of the 2010 recovery, however, was not felt evenly across the various suppliers and product segments. Orders increased almost unilaterally for all of the major automation suppliers over the course of 2010, but the ability to turn these increased orders into recognized revenues varied significantly across the major suppliers depending on a number of factors including preferred sales channel, vertical market focus, and each supplier’s mix between aftermarket sales and greenfield projects.

Most automation markets saw a rebound in new orders over the course of 2010, with a corresponding increase in order backlogs. Based on the growth in incoming orders for new project business seen throughout the year, ARC expects a rebound to healthy growth for automation shipments to many of the “hot” developing countries for 2011. ARC also expects many of developed regions to rebound to moderate health in 2011 as many suppliers have seen their aftermarket business come back online. Consequently, ARC feels the global automation markets are on track to return to pre-recession shipment levels in 2011, as noted in the ARC research report, “Automation Expenditures for Process Industries Worldwide Outlook.”

Continued growth, if...

The global manufacturing economy seems on track to return to pre-recession shipment levels in 2011, but risks remain. High oil prices due to growing demand from emerging nations and continuing political turmoil in the Middle East could upset growth. U.S. unemployment rates continue to be a deterring factor, as does the European debt crisis. Due to the numerous risks still present and the lag between orders and final shipment for new project business, short-term prospects for the market range widely by region and industry. While most sectors are expected to experience positive growth over the forecast period, growth in the oil and gas and electric power markets will drive the overall market growth positively in 2011 and beyond.

Global manufacturing numbers

The global automation index saw a sizeable jump in Q4 2010, generating a value of 198; a 12-point increase over the Q3 2010 value of 186. The index continued to grow in Q1 2011, registering a value of 205; a 7-point increase from Q4 10. Although the global index is still expanding, it is growing at a decreasing rate, and only one regional index—Asia—witnessed growth in Q1 2011. This decreasing growth rate in the global index is the result of stagnant first-quarter growth in the U.S. index, a significant decrease in the European index, and strong growth in the Japanese index, as first-quarter growth was strong in Japan before the 3/11 crisis.

The growth from Q1 2010 to Q1 2011 is nearly 20% in the global and U.S. indices, 21% in the Asian index, and 14% in the European index. Even though these numbers are encouraging, the double-digit year-over-year growth rates are more heavily influenced by the weak 2010 results than the strong showing in Q1 2011.

David Clayton is a senior analyst for ARC Research whom covers process automation.

www.arcweb.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.