Brian Van Batavia, among Control Engineering Leaders Under 40 for 2010

Want to meet the next generation of manufacturing automation and controls leaders? In November 2010, Control Engineering highlights 19 young professionals from around the globe who are making their marks in everything from system design to academia. These leaders aim to inspire others to get involved in engineering and resolve local and global challenges through smarter applications of automation and control technologies. Meet Brian Van Batavia ...

11/15/2010


Brian	Van Batavia, Lead Engineer—Embedded Controls, Eaton Corp., Control Engineering Leader Under 40, class of 2010Brian Van Batavia, 34         

Lead Engineer—Embedded Controls, 4 years

Eaton Corporation     

Eden Prairie, MN USA          

www.eaton.com

Job function: System or Product Design, Control or Instrument Engineering

Academics: Bachelor of Science in Electrical and Computer Engineering, University of Minnesota Duluth         

Achievements: I have been active in the field of control engineering for over 12 years. My experience has focused on products and services for the automotive industry. I have participated in the development of high-performance vehicular test systems and advanced hybrid power systems. I developed a means of reducing the torque ripple created from high-performance, low-inertia permanent magnet motors used in automotive powertrain applications. This advancement enables realistic simulation of engine properties—including low physical inertia and engine firing torque pulses—using only an electric motor.

I have also led the design and implementation of the embedded control system for hydraulic hybrid drive systems. I co-authored a paper on the benefits of electro-hydraulics (IFPE 2008) and have also authored a technical paper on an innovative hydraulic hybrid vehicle energy management system (SAE 2009). I am a member of the Society of Automotive Engineers (SAE) and an active member of the SAE Truck and Bus Control and Communications Network committee, as well as the Hydraulic Hybrid committee. I have helped to shape several SAE standards related to digital communications systems and hybrid power systems for commercial vehicles. I am also a member of the IEEE Vehicular Technology Society.       

Control Engineering Leader Under 40, class of 2010 logoI have been planning the addition of one or more sustainable energy generation sources to my home. I am working on the design of a small roof-mounted wind generator which will likely be combined with an array of solar cells to provide the power needed to operate my home. My ultimate goal is to be able to power my home in addition to an electric vehicle. I have initiated this project due to my interest in sustainable engineering. I believe that clean and affordable energy generation and storage is one of the greatest challenges that will face my generation.   

No-work hobbies: I am currently pursuing a Masters of Engineering degree with a concentration on integrated vehicle systems. I have also worked with faculty and students from the University of Minnesota related to research activities which are affiliated with the Center for Compact and Efficient Fluid Power. I have pursued these activities because I believe that interaction between industry and academia is critically important and can be mutually beneficial for both entities. I also feel that continuous learning and improvement is a requirement for the success of any engineer—in particular those involved with control engineering.          

Engineering hobbies: I own a 1969 Pontiac Firebird that I restored to working condition when I was 14 years old. I also own and maintain a 1974 Dodge Sno-Buster pickup truck that I use regularly during the snowy Minnesota winter months to keep my driveway clear.

More? I am married and have three children between the ages of two years and eight years old. I regularly volunteer my time in the children's ministry at my church and have participated in several local activities organized by United Way and Habitat for Humanity.        

Start in controls: I was born and raised in a small town within an agricultural area of southwest Minnesota. My father is a self-employed mechanic and was a key contributor to the development of my interest in machines and vehicles. I have always been fascinated by the ability of machines like tractors, trucks, trains, combines, and grain elevators to do massive amounts of work with minimal human effort.

Return to main article: Control Engineering Leaders Under 40, class of 2010

- Compiled by Renee R. Bassett for Control Engineering.

See www.controleng.com/awards for other winners and other recognition programs for all ages.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.