Bluetooth Ethernet gateway

Wago Corporation has released Bluetooth Ethernet Gateway ideal for mobile applications.

06/10/2011


Wago Corporation's new 758-915 Bluetooth Ethernet Gateway wirelessly transfers Ethernet protocols, such as Profinet, Modbus/TCP or EtherNet/IP via Bluetooth 2.0. Replacing communication lines between two automation systems, 758-915 features a 400 meter range courtesy of an international, license-free 2.4-2.480 GHz ISM band. This is ideal for mobile applications or those where cable-based data transmission would be too costly, complex or impossible.

758-915 employs Frequency Hopping Spread Spectrum technology and Low Emission Mode for coexistence with other technologies such as WLAN. The 758-915's on-board "Mode-Button" simplifies connections and automation system configuration. Web-based Management provides additional configuration options, e.g., password or IP address; on-unit LEDs provide configuration and diagnostic status.

Engineered for harsh applications, the IP65-rated 758-915 employs rugged M12 cables for automation connections and carries a temperature rating of -30 °C to +65 °C. 758-915 features an internal, circularly polarized antenna for reliable radio connections in metal-intensive environments.

www.wago.com

www.controleng.com/wireless

www.controleng.com/networks



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me