Automation Integrator Guide, 2011 articles

The Automation Integrator Guide 2011 articles included with December 2010 print and digital edition of Control Engineering and Plant Engineering are linked in this table of contents, with a connection to the often updated Automation Integrator Guide online directory to automation system integrators.

12/16/2010


Automation Integrator Guide 2011 coverTable of contents for the Automation Integrator Guide 2011, included with December 2010 print and digital edition of Control Engineering and Plant Engineering follows, with links below; connect also to the often-updated online Automation Integrator Guide online director to automation system integrators.

System Integrator of the Year, 2011 winners- Automation System Integrator Awards: Control Engineering recognizes the best in automation, controls, and instrumentation system integration with our fifth annual System Integrator of the Year awards.

Tutorial: Stay Involved, Get the Most from an Automation Project - Automation system integrators advise end users to keep track of what’s happening at every stage of an automation project. Here’s what to watch for to ensure you get what you want.

CSIA 2010: Growth, Change - Control System Integrators Association provides a positive state-of-the-association look at 2010.

Automation Integrator Guide online - Find an integrator for your next automation project.

ONLINE extra 

See prior winners of the Control Engineering System Integrator of the Year recognition in the System Integrator Hall of Fame.

Think Again: Time for automation system integration - Gain efficiency through tighter control system integration.

Integrating Disparate Control Systems - Advancements in open systems and network technologies are showing vendors and manufacturers alike that ‘playing nice on the same wire’ can build bridges between once-isolated islands of automation and reap benefits for everyone.

Process Models, Advanced Control Support Super Steel Mill - Extensive system integration and custom advanced control software supports one of only four cold mills in the U.S. coupled to a pickle line. The mill automation system supports a continuous process requiring precision control of motor speeds and integration of auxiliary equipment.

Automation Integrator Guide digital edition shows see how the articles above appeared in print.

Control Engineering December 2010 edition article archive page - browse for other articles of interest.

Link to the Plant Engineering December 2010 digital edition.

 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.