Adapter creates tool-free interface to IO modules

Wago Corporation's Interface Adapter provides a tool-free interface and captures analog/digital signals for eight combined modules - ideal for machines requiring large amounts of input/output signals.

05/11/2011


Wago Corporation’s new Interface Adapter provides Jumpflex Signal Conditioners and Relays with a tool-free interface to the Wage-I/O-System or other PLC interfaces. Interface Adapters capture analog/digital signals for eight combined Jumpflex modules — ideal for machines requiring large amounts of input/output signals. Ribbon cable and D-Sub connector models provide 8-channel connectivity; other interface products connect the Interface Adapters to Wago’s 16-Channel Digital I/O modules.

Jumpflex Interface Adapters streamline commissioning and eliminate wiring errors for both field and control levels. To simplify troubleshooting, each Interface Adapter features marking tag holders and a test location at each channel. Integrated indicators for signal and/or power status are also included. Complementary products include DIN-rail mount interface boards and relay modules.

Jumpflex Signal Conditioners and Relays feature an ultra-compact 6mm, DIN-rail mount housing and a flexible jumpering system that reportedly eliminates redundant wiring. All models provide safe isolation of input, output and supply circuits with 2.5 kV test voltage to EN 61140. Signal transmission is attained with an accuracy <0.1% of the full scale value, according to Wago. The Signal Conditioner modules are rated -25 to +70°C for wide variety of industrial sensors.

www.wago.us

Wago Corporation

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me