About the Electrical Generating Systems Association

Founded in 1965, the Electrical Generating Systems Association (EGSA) is the world’s largest organization exclusively dedicated to On-Site Power Generation. EGSA is comprised of 700 companies around the world that make, sell, distribute, and use On-Site Power generation technology and equipment, including generators, engines, switchgear, controls, and much more.

11/01/2009


Founded in 1965, the Electrical Generating Systems Association (EGSA) is the world’s largest organization exclusively dedicated to On-Site Power Generation. EGSA is comprised of 700 companies around the world that make, sell, distribute, and use On-Site Power generation technology and equipment, including generators, engines, switchgear, controls, and much more.

 

Under the leadership of its Board of Directors and operating through its various committees and staff, EGSA strives to educate, provide networking opportunities, and share relevant knowledge and trends with industry professionals including manufacturers, distributors/dealers, engineers, regulatory agencies, manufacturers’ representatives, contractors/integrators, and others serving On-Site Power consumers.

 

The Association’s vision is to provide an environment where On-Site Power Generation industry experts unite and share knowledge to drive the industry to higher levels of service and performance.

 

In late 2007, EGSA commissioned a Strategic Planning Committee, which has subsequently been developing a plan for the Association and its members.

 

Among the goals established during this planning process was the creation of a “Green” Committee, which met for the first time at the EGSA 2009 Fall Conference in Colorado Springs. The Green Committee is responsible for gathering, monitoring, communicating, and distributing Green business opportunity information to the EGSA Membership. In addition, the Committee will investigate best practices for conducting “Green” Conferences and offer techniques EGSA Members may use to develop a Green strategy.

 

Programs that Benefit Members and the Industry

EGSA is best known for its On-Site Power Generation Schools, which provide a complete technical overview of On-Site Power systems. EGSA offers a two-tiered program with Basic and Advanced schools.

 

Designed for non-technical personnel, the Basic School provides a general overview of On-Site Power Generation equipment. In comparison, the Advanced School offers highly technical and in-depth coverage of the equipment and is intended for experienced and technical personnel.

 

EGSA also is recognized for offering the On-Site Power industry’s first Electrical Generator Systems Technician Certification program, created as part of EGSA’s commitment to advancing professionalism within the On-Site Power industry. Through rigorous testing, the program identifies technicians who possess a broad knowledge of electricity, mechanical and electrical components, and the interaction between them, and are proficient in the installation, service, maintenance, and repair of On-Site Power generation systems.

 

Finally, EGSA monitors the development of national standards concerning the use of On-Site Power equipment and technology, such as the National Electric Code (NEC). In addition, EGSA has developed performance standards for equipment and components particular to its industry.

 

Visit www.EGSA.org for more information or call 561-750-5575.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.