4-axis 750 W servo drive for Ethernet motion controllers

Galil adds to multi-axis drive family, the packaging of multio-axis drives with motion controllers saves cost, space, wiring.

03/15/2011


Galil Motion ControGalil DMC Familyl added the AMP-43240 to its multi-axis drive family. The AMP-43240 is a 4-axis servo drive which provides up to 750W per axis. It resides inside Galil’s DMC-4040 or DMC-4143 4-axis motion controller enclosure. The packaging of the multi-axis drives with the motion controller reportedly saves cost, space and wiring.

The new Amp-43240 contains four transconductance, PWM amplifiers for driving brushless servo motors at 20-80 V dc. Each amplifier drives motors operating up to 10 A continuous, 20 A peak per axis. The gain settings of the amplifier are user-programmable at 0.5, 1.0 and 2.0 Amp/Volt. The switching frequency is 24 kHz. The amplifier offers protection for over-voltage, under-voltage, over-current, short-circuit and over-temperature. A shunt regulator option is available.

The packaging of the 4-axis drive inside the motion controller enclosure saves space compared to using external drives. The DMC-4040 4-axis controller and drive package dimensions are 8.1 x 7.3 x 1.7-inch. Two 4-axis drives can also be installed inside the DMC-4080 8-axis controller package which measures 11.5 x 7.3 x 1.7-in. Other multi-axis drives available from Galil include 20 W and 500 W servo drives and drives for stepper motors.

Detailed specifications for Galil’s DMC-41x3 and DMC-40x0 motion controllers and drives.

www.galilmc.com

Galil Motion Control Inc.

- Edited by Gust Gianos, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me