Recent Posts

• More on Squirrel Cage Motors and Slip
• Motor Optimization; Same Efficiency + Different Slip = Different Savings
• Resources for the Resourceful: MotorMaster; Optimizing Motor Efficiency
• Resources for the Resourceful: The Honeywell "Gray Manual'
• Control Technology; A Glimpse Backward and Some Thoughts on the Future
• Mounting Position Effects: +30/-90° from vertical = +8/-3% Accuracy
• Resources for the Resourceful: Electrical Fundamentals
• Load Profiles; Big Changes, Big Challenges
• System Load Profiles and the Challenges They Present
• HVAC System Rules of Thumb

Recent Comments

• Laszlo Weress on Motor Optimization; Same Efficiency + Different Slip = Different Savings
• Laszlo Weress on Motor Optimization; Same Efficiency + Different Slip = Different Savings
• Laszlo Weress on More on Squirrel Cage Motors and Slip
• Laszlo Weress on More on Squirrel Cage Motors and Slip
• elutlegiomi on Damper tests provide valuable insights. Seriously--I'm not kidding. Part 1

Most Commented On

• Looking Back at my Educational Experience; Reflections on Wired Engineering's "Top 5 Reasons it Sucks to Be an Engineering Student" (4)
• Thoughts on Sustainable Design - Part 2 (And, a Contest!) (4)
• Condenser Water System Commissioning - Lesson 1 (2)
• More on Squirrel Cage Motors and Slip (2)
• Motor Optimization; Same Efficiency + Different Slip = Different Savings (2)

Archives

• August 2008
• July 2008
• June 2008
• May 2008
• April 2008
• March 2008
• February 2008
• January 2008
• December 2007
• November 2007
• October 2007
• September 2007
• August 2007
• July 2007
• June 2007
• May 2007