New Products: Chilling News


Centrifugal chiller
capacity has been extended to provide the industry with what is claimed to be the largest-capacity, single-package chiller using HFC-134a. This increases the chiller’s previous capacity by 75%, while its compact footprint is said to be as much as 50% smaller than chillers of comparable capacity. For more information about MaxE YD from York, click here .

Large capacity industrial water chiller has been reintroduced to the market after a six-year absence. With a capacity performance in the nominal 3,000-, 4,000- and 5,000-ton range, the unit uses environmentally sound HFC 134a refrigerant. A steam turbine, electric motor or gas engine drive can be selected to match the most economical fuel available. Dual-drive steam turbine and electric motors have been applied, giving the owner-operator maximum flexibility. For more information about Model 17DA from Carrier, click here .

Recirculating chiller selector tool selects up to five recirculating chillers, based on user input that will work for a particular application. The selection process can be further refined by inputting the set point temperature, ambient temperature, desired flow rate, or power configuration.The user then configures the chiller by selecting a pump, controller package, and options. The tool provides pump curves and complete descriptions of the controller packages and upgrade options. For more information on selector tool from Lytron, click here .

Centrifugal chiller has magnetic bearings that offer oil-free, frictionless operation as low as 0.375 kW per ton IPLV. Full-load performance is as low as 0.62 kW per ton, which the vendor claims is about 32% more efficient that screw compressor chillers. The magnetic bearing technology is also said to reduce sound levels. For moreinformation about chillers from McQuay, click here .

Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me