Designing data center electrical distribution systems

Designing efficient and reliable data center electrical systems requires looking through the eyes of the electrical engineer—and the owner.


This article has been peer-reviewed.Learning objectives

  • Understand the preliminary considerations of designing data center electrical distribution systems.
  • Know how to design efficient data centers that can also accommodate growth.
  • Identify the codes and standards that apply to designing data center electrical distribution systems. 

Figure 1: Increasing demand for cloud services is putting a strain on server capacity. This photo shows data center servers while they are being configured and wired. All graphics courtesy: Jacobs EngineeringData centers are among the hottest developments in the technology world. The growing needs of the Internet of Things have forced the biggest players in the computing world to spend billions of dollars on new multi-megawatt data centers. This boom in data center construction is largely fueled by the growing use of cloud services, which has put a strain on server capacity (see Figure 1). Additionally, data centers are considered mission critical when their operation is of importance to organizations’ economic or functional needs. Even a disruption of a few seconds in the operation of certain types of mission critical data centers could cost millions of dollars.

This article explores data center design through the eyes of both the owner and the electrical engineer. It also discusses the key components of data centers and touches on the codes and standards that apply to data centers and their components.

Preliminary considerations

Data centers, many having servers as their main components, need electrical power to survive. It is, therefore, only natural that any talk about building a data center should begin with figuring out the electrical needs and how to satisfy those needs.

Capacity: Before deciding anything else, the owner must decide the capacity of the data center (in megawatts). In previous planning efforts, it was common to use W/sq ft. However, today it is more common to discuss kW per rack, which may vary from 5 to 60 kW. This power concentration per rack can also drive cooling system type and capacity, which must be planned for in the capacity. The owner also needs to consider future capacity.

Another big decision is to determine the level of redundancy. Reliability is very important for data centers, and disruptions are costly. But the cost of building a data center increases significantly with higher reliability. Therefore, the owner should decide where to draw the line, and determine how much risk is acceptable.

Auxiliary power:

<< First < Previous Page 1 Page 2 Page 3 Next > Last >>

Product of the Year
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
40 Under Forty: Get Recognized
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
MEP Giants Program
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
November 2018
Emergency power requirements, salary survey results, lighting controls, fire pumps, healthcare facilities, and more
October 2018
Approaches to building engineering, 2018 Commissioning Giants, integrated project delivery, improving construction efficiency, an IPD primer, collaborative projects, NFPA 13 sprinkler systems.
September 2018
Power boiler control, Product of the Year, power generation,and integration and interoperability
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
click me