2017 HVAC and building automation systems study

Respondents to the Consulting-Specifying Engineer 2017 HVAC and Building Automation Systems Study identified seven high-level findings.

09/19/2017


Respondents to the Consulting-Specifying Engineer 2017 HVAC and Building Automation Systems Study identified seven high-level findings:

Figure 2: Six out of 10 respondents cited air handlers, fans/air movement, and pumps/pumping systems as having generated design revenue for their firms within the past year. Source: Consulting-Specifying Engineer

  1. Building structures: More than half of mechanical engineers specify products for office buildings, industrial/manufacturing facilities/warehouses, educational facilities, hospitals/health care facilities, and government buildings/military facilities.
  2. Specification involvement: Seventy-three percent of respondents determine requirements/write specifications for HVAC systems, equipment, and controls.
  3. Design value: Engineering firms are specifying $2.5 million annually, on average, in HVAC and BAS products for new and existing buildings, with 28% specifying more than $5 million.
  4. HVAC challenges: At least half of respondents agree that energy efficiency and an inadequate budget for good design are affecting the future of HVAC systems.
  5. BAS challenges: Four out of 10 engineers reported interoperability/complementing systems and inadequate budgets as top challenges when designing BAS.
  6. Products specified: HVAC controls, air handlers, and fans/air movement were the top three HVAC equipment types or control systems currently being specified by mechanical engineers.
  7. Time spent researching: The average mechanical engineer spends 37% of their billable hours/time at work researching and/or specifying HVAC systems and BAS.

View more information at www.csemag.com/2017HVACBAS


 

Figure 1: Eight in 10 engineers focus on a fire and life safety system’s interoperability with other systems when making a recommendation or purchase decision. Source: Consulting-Specifying Engineer 2016 Fire and Life Safety Study

6 in 10 engineers usually write open (alternate or substitute) electrical or power system specifications. Source: Consulting-Specifying Engineer 2016 Electrical and Power Study

19%: The average percentage of an engineer’s time that is spent on proposals and business development when working on lighting and/or lighting controls projects. Source: Consulting-Specifying Engineer 2017 Lighting and Lighting Controls Study

¼ of engineering firms specify less than $500,000 in HVAC and BAS products for new and existing buildings. Source: Consulting-Specifying Engineer 2017 HVAC and Building Automation Systems Study



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Exploring fire pumps and systems; Lighting energy codes; Salary survey; Changes to NFPA 20
How to use IPD; 2017 Commissioning Giants; CFDs and harmonic mitigation; Eight steps to determine plumbing system requirements
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Knowing when and how to use parallel generators
Power system design for high-performance buildings; mitigating arc flash hazards
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me